KLS Martin
Brazo portamonitor CEMOR 55"
CEMOR® is KLS Martin’s monitor support system, built to integrate with the independant® ceiling supply consoles of the operating room and intensive care. Its modular design carries anything from a single monitor to eight screens. For large formats, such as a 55" surgical monitor, the system is configured as CEMOR LS (Large Screen), for a single screen of up to 60 inches with maximum stability and load capacity. Mounted on the independant® IDP 101 S carrier arm, it places the monitor precisely in front of the surgical team, freeing floor space and easing cleaning thanks to fully internal cabling.
- 150kg
- Maximum load, on two 75 kg VESA points
- 37–60″
- Supported screen size
- 8
- Screens per console in the modular version
- IP20
- Rating to IEC 60529
- CEMOR LS configuration, for a single large monitor from 37" to 60".
- VESA support for large screens with up to 150 kg capacity (two 75 kg points).
- Electromagnetic brakes with BrakeGuide: LED lighting shows which point has been released, for safe handling even in low light.
- Smooth, controlled movement from the side or lower/rear handles, with minimal effort and no drift from the set position.
- Fully internal cabling, with no conduits or loose cables.
- Integrates with the independant® IDP 101 S / IDP 101 S XL carrier arms, with E-Brake emergency brake and optional SurroundLED lighting.
Technical data
- Screens supported
- 1 single monitor (Large Screen format)
- Compatible screen size
- 37" – 60"
- VESA support (Large Screen)
- 2 points of 75 kg each = 150 kg maximum
- Sound pressure level
- ≤ 65 dB(A) (EN ISO 3746)
- IP rating (IEC 60529)
- IP20
- Operating temperature
- +10 °C to +40 °C
- Operating humidity
- 30 % to 75 % (non-condensing)
- Transport/storage temperature
- −25 °C to +70 °C