Skip to content

Services

Surgical instrument maintenance

Sharpening and reconditioning of the complete set, plus service for rigid laparoscopy optics, any brand.

20+years
Caring for the instruments of Mexico’s operating rooms
Allbrands
One quality standard for all your instruments
Nationwide
Coverage with on-site collection or courier shipping across Mexico
6points
Of inspection per piece: corrosion, soiling, wear, edge, fracture and missing parts
Certified by KLS Martin

The complete set, ready for surgery

We look after the complete tray, not the single piece. We service surgical instruments of any brand, organised by speciality (neurosurgery, spine, laparoscopy, ENT, general surgery and more), so every set goes back to the operating room sharp, aligned and with every piece working the same. That prevents instruments going out of service and delays in the middle of surgery.

Rigid laparoscopy optics have their own process: they are not sharpened, they are assessed as an optical system. We check image sharpness, sealing and the condition of the fibre, and tell you clearly whether it is worth repairing or replacing.

All the work is done by specialists, with on-site collection or shipping by courier anywhere in the country.

Surgical instrument maintenance
Preventive maintenance

Preventive maintenance

Scheduled by tray: the set comes back sharpened, tested and documented as a single unit.

  1. Sharpening, polishing, alignment and lubrication for cutting, grasping and dissecting instruments of any brand, restoring the factory edge and precision.
  2. Full functional check per set: every instrument on the tray is tested on its own and together, so that all pieces respond alike.
  3. Maintenance protocols organised by speciality —neurosurgery, spine, laparoscopy, ENT, general surgery and more—, matched to how each is used.
  4. Inspection for corrosion, staining and surface wear, with coatings and finishes that extend the life of the whole set.
  5. Traceability by tray: each set is identified, documented and followed as a single unit, and scheduled alongside the rest of the theatre’s instruments.
Corrective maintenance

Corrective maintenance

When a piece already fails: it is repaired within the set service, not as a one-off job.

  1. Reconditioning of worn parts —jaws, ratchets, non-stick coatings— within the same service of the set, without repeated single-instrument interventions.
  2. Correction of bent tips, misaligned jaws and ratchets that no longer close, returning each piece to its original geometry.
  3. Piece-by-piece diagnosis that tells you whether an instrument can be repaired or should be replaced.
  4. Service for instruments of every brand, bringing pieces from different makers onto one tray under a single quality standard.
  5. Internationally certified centre and staff for sharpening and reconditioning, to the standards each speciality demands.
  6. National coverage, with personal collection and delivery nearby or by courier anywhere in the country.
Laparoscopic optics maintenance

Laparoscopic optics maintenance

Six jobs on the optical system, not on the edge: a different process within the same service.

  1. Inspection and cleaning of the lens system, to recover sharpness, contrast and colour in the picture reaching the monitor.
  2. Leak and seal testing of the optic’s body, which is what makes reprocessing safe in every sterilisation cycle.
  3. Repair of the fibre optic and the illumination system, when transmitted light is reduced or uneven.
  4. Correction of lens misalignment and straightening of the outer sheath after knocks or drops.
  5. Service for optics of various angles —0°, 30° and others— and diameters, any brand.
  6. Specialist diagnosis that determines whether the optic is repairable or better replaced.

How it is contracted

Everything to agree before signing, in one view.

Brands covered
Surgical instruments and rigid optics of every brand.
Service unit
Complete set or tray by speciality.
Processes included
Sharpening, polishing, alignment, lubrication and functional check.
Reconditioning
Replacement of jaws, ratchets, coatings and worn components.
Suggested frequency
Periodic, by sterilisation cycles and how the set is used. For optics, whenever sharpness or light drops and after any knock or fall.
Traceability
The set is identified and followed as a complete unit.
Delivery
Set checked, tested and ready for use in the operating room.
Certification
Internationally certified centre and staff.
Coverage and logistics
National, with personal or courier collection and delivery.
Type of optic
Rigid laparoscopy optics, in various angles —0°, 30° and others— and diameters.
What is inspected on the optic
Lens system, optical fibre, body tightness and alignment.
Leak test
Mandatory: the safety of the next reprocessing cycle depends on it.
Optic repairs
Fibre and illumination, lens misalignment and straightening of the outer sheath.

Specialities we cover

Every tray comes back with its speciality’s protocol.

  • Neurosurgery

    Neurosurgery

    Kerrison rongeurs, dissectors and micro forceps, sharpened and aligned.

  • Spine

    Spine

    Retractors, curettes and gouges for spine surgery.

  • Laparoscopy

    Laparoscopy

    Graspers, scissors and rigid optics, with leak testing.

  • ENT

    ENT

    Fine instruments checked piece by piece under magnification.

  • General surgery

    General surgery

    Complete basic trays: scissors, forceps and needle holders.

  • Cardiovascular

    Cardiovascular

    Atraumatic vascular instruments, aligned and tested.

  • And more

    Gynaecology, urology, orthopaedics, ophthalmology… If your tray has a speciality, we service it.

Private practice Specialty Management CSSD

Self-assessment

What does your medical unit need?

Tell us who you are and what you need. A person who knows the equipment replies — not a call center.

Follow us

News

Clinical newsletter

One useful note a month on operating rooms, medical equipment and sterilization. No sales noise.